Wireless powering for implantable device networks

Leuven - PhD
Meer dan twee weken geleden

Develop novel ASIC solutions to power those next-generation smart implants


The miniaturization of electronic systems has allowed to realize mm-sized implanted devices for all kind of applications, ranging from sensing of relevant biological parameters to drug delivery and nerve stimulation. However, all those systems require a power source and batteries are normally too big or requiring to be periodically recharged / replaced. Given the limited and discontinuous amount of energy that can be harvested inside the body, Wireless Power Transfer (WPT) is a promising solution. There are multiple ways to perform in-body WPT, using inductive, ultrasound and RF energy sources.

Finding a generic solution to the problem of wirelessly powering implantable devices is perceived today as an impossible challenge. This is especially true if we consider wearable, low-weight and comfortable power transmitters out of the body. Each powering method presents different advantages / disadvantages. Inductive powering is insensitive to human body and interfaces between air and tissue, but very sensitive to misalignment. Ultrasound powering has very low path losses in the human body, but is affected by 99.9% attenuation on the interface skin/air. RF powering has the advantage to have field power decaying as the inverse of distance, instead of the inverse of distance squared (as it happens in the inductive powering). However, it suffers from significant absorption into the body and interface reflections. Recently people have tried to exploit the human body, which can act as a conductor itself to transfer power, in a similar fashion as 802.15.6 human body communication. Other research groups are looking at various ways of harvesting vibrational, light or temperature gradient sources. This PhD aims to develop efficient WPT technology for miniature implantable solutions based on these novel concepts. The candidate will perform a detailed literature study. A suitable mathematical model and simulation environment will be developed. The core research task will be in the design of very energy-efficient energy harvester and power management circuits. The candidate will be able to design and have their own ASIC manufactured. Finally the ASIC will be tested in a suitable in-vitro model.

Required skills:

  • Analog design for integrated circuits (IC)
  • Circuits for energy harvesting and power management
  • Electronic test and prototyping based on commercial-of-the-shelf components​

Required background: Electrical engineering (micro-electronics)

Type of work: 20% experimental (PCB / proof-of-concept), 70% analog circuit design, 10% lab testing

Supervisor: Chris Van Hoof

Daily advisor: Nick Van Helleputte

The reference code for this position is 2020-106. Mention this reference code on your application form.
Chinese nationals who wish to apply for the CSC scholarship, should use the following code when applying for this topic: CSC2020-55.


Share this on


Deze website maakt gebruik van cookies met als enige doel het analyseren van surfgedrag, zonder enige commerciële insteek. Lees er hier meer over. Lees ook ons privacy statement. Sommige inhoud (video's, iframes, formulieren,...) op deze website zal pas zichtbaar zijn na het accepteren van de cookies.

Accepteer cookies